KTM 1290 SUPER ADVENTURE R 2017 Owner's Manual page 188

15 WHEELS, TIRES
–
Position the brake calipers.
The brake linings are correctly positioned.
–
Mount screws
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point. Fix the hand brake lever in the activated posi-
tion.
The brake calipers straighten.
–
Tighten screws
S00959-11
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Remaining chassis screws
–
Remove the vehicle from the center stand. (
V00006-11
5
on both brake calipers but do not tighten yet.
5
on both brake calipers.
M10
6
in the drill hole.
7
.
45 Nm Loctite
(33.2 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 138)
186
® 243™