Table of Contents
Advertisement
12
SUSPENSION SETTING
12.1
Fork/shock absorber
12.2
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
The fork and the shock absorber offer many options of adapting the suspension to the riding
style and the payload.
Info
The recommendations for the suspension setting are shown in table
found on the left inside cover.
These adjustments are guidelines and should always be the basis for a suspension setting.
If the guidelines are not adhered to, the riding characteristics could deteriorate, particularly
at high speeds.
F00972-10
–
Turn white adjusting screw
Info
Adjusting screw
The compression damping is located in left fork leg COMP (white adjusting
screw). The rebound damping is located in right fork leg REB (red adjusting
screw).
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
K00813-10
1
clockwise as far as it will go.
1
is located at the upper end of the left fork leg.
130
1
. The table is
Advertisement
Table of Contents
