Maintenance; Safety; Preparation - Optimum BF 30 Vario Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
5

Maintenance

In this chapter you will find important information about
inspection
maintenance
repair
of the mill drill.
The diagram below shows which of these headings each task falls under.
Inspection
Measuring
Testing
Fig. 5-1: Maintenance tasks
ATTENTION !
Properly performed regular maintenance is an essential prerequisite for
• safe operation,
• fault-free operation,
• long service life of the and
• the quality of the products you manufactured.
Installations and equipment from other manufacturers must also be in optimum condition.
5.1

Safety

WARNING!
The consequences of incorrect maintenance and repair work may include:
• Very serious injury to personnel working on the mill drill,
• Damage to the mill drill.
Only qualified personnel should carry out maintenance and repair work on the mill drill.
5.1.1

Preparation

WARNING!
Only carry out work on the mill drill if it has been unplugged from the electric power sup-
ply.
Page 32 Mill Drill
Maintenance
Maintenance
Rough cleaning
Fine cleaning
Conserving
Lubricating
Completing
Replacing
Readjust
BF 30 Vario
Maintenance
Repair
Repairs
Replacing
Adjusting
Version 1.0.6 Stand 27 / 08 / 2010