Safety Devices; Emergency-Stop Button - Optimum BF 30 Vario Operating Manual

Safety
1.6

Safety devices

Use the mill drill only with properly functioning safety devices.
Stop the mill drill immediately if there is a failure in the safety device or if it is not functioning for
any reason.
It is your responsibility!
If a safety device has been activated or has failed, the mill drill must only be used when
the cause of the failure has been removed,
it has been verified that there is no resulting danger for the staff or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other personnel working with the mill drill. The possible consequences are
• damage as a result of components or parts of components flying off at high speed,
• contact with rotating parts,
• fatal electrocution.
The mill drill includes the following safety devices:
an EMERGENY-STOP button,
a protective cover at the drill-mill head,
a separating protective equipment on the milling spindle.
WARNING!
The separating protective equipment which is made available and delivered together with
the machine is designed to reduce the risk of workpieces or fractions of them from being
expelled, but not to remove them completely.
1.6.1

EMERGENCY-STOP button

The EMERGENCY-STOP button switches
the mill drill off.
„Starting the mill drill" on page 25
ATTENTION!
The EMERGENCY-STOP button switches off the mill drill immediately.
Only press the EMERGENCY-STOP button in case of danger! If the emergency stop but-
ton is actuated in order to stop the mill drill generally you might damage tools or
workpieces.
After actuating the button, turn it to the right, in order to restart the machine.
27 / 08 / 2010 Version 1.0.6 BF 30 Vario
OPTIMUM
M A S C H I N E N - G E R M A N Y
EMERGENCY-STOP
Fig. 1-1: EMERGENCY-STOP button
Mill Drill Page 9