Instructions; G Codes - Omron NY532-5400 Instruction & Reference Manual

1 Basic Information on NC Programming

Instructions

The following table lists the G codes and M codes supported by NJ501-5300 and NJ532-5400.

G Codes

Modal group Initial modal
00 Non-modal ---
00 Non-modal ---
00 Non-modal ---
00 Non-modal ---
00 Non-modal ---
00 Non-modal ---
00 Non-modal ---
01 Rapid Position- G01
ing
02 Plane G17
03 Distance G90
06 Unit Operation
depends on
the Orthogo-
nal Axis
Command
Unit setting
1 - 2
Instruc
Name
tion
G04 Dwell
G09 Exact Stop
G28 Return to Reference
Point
G30 Return to 2nd, 3rd or
4th Reference Point
G31 Skip Function
G52 Local Coordinate Sys-
tem Set
G53 Dimension Shift Cancel Runs commands in the machine coordinate sys-
G00 Rapid Positioning
G01 Linear Interpolation
G02 Circular Interpolation in
CW direction
G03 Circular Interpolation in
CCW direction
G17 X-Y Plane Selection
G18 Z-X Plane Selection
G19 Y-Z Plane Selection
G90 Absolute command
G91 Incremental command
G20 Inch input
G21 Metric input
Outline of function
Stops the CNC coordinate system for a predefined
period of time.
Executes a forcible control deceleration stop
together with the registration of in-position at the
termination of a block.
Moves the tool to the reference point (position 0)
via the middle point specified by an argument of
the instruction.
Moves the tool to the 2nd, 3rd and 4th reference
point.
Provides Rapid Positioning (G00) and input stop.
Creates coordinates in the Work Coordinate Sys-
tem.
tem.
Performs a point-to-point operation in the minimum
time by following the restrictions of CNC motor set-
tings.
Moves a CNC motor from the current position to a
specified position.
Moves the tool on an arc path on the XY, YZ, or ZX
plane.
Changes a plane, the reference of Circular Interpo-
lation (G02/G03), Cutter Compensation
(G40/G41/G42), and Coordinate System Rotation
(G68/G69).
Enables absolute position mode for all axes in the
CNC coordinate system, and moves the axes to a
specified position in the current coordinate system.
Enables relative Incremental position mode for all
axes in the CNC coordinate system, and moves
the axes a certain distance from the last command
position.
Switches all the settings of the CNC coordinate
system, command values, and the unit of current
values.
NJ/NY-series G code Instructions Reference Manual (O031)