Honeywell ST700 User Manual page 95

Parameter
INPUT_OPTIONS
IN
IN_LO
IN_1
IN_2
IN_3
RANGE_HI
RANGE_LO
BIAS_IN_1
GAIN_IN_1
BIAS_IN_2
GAIN_IN_2
BIAS_IN_3
GAIN_IN_3
COMP_HI_LIM
COMP_LO_LIM
ARITH_TYPE
BAL_TIME
BIAS
GAIN
OUT_HI_LIM
OUT_LO_LIM
UPDATE_EVT
BLOCK_ALM
Revision 2.0 FOUNDATION Fieldbus ST 700 Pressure Transmitter User's Guide
Option bit string for handling the status of the auxiliary inputs.
The block input value and status.
Input of the low range transmitter, in a range extension application.
The first block input value and status.
The second block input value and status.
The third block input value and status.
Constant value above which the range extension has switch to the high
range transmitter.
Constant value below which the range extension has switch to the high
range transmitter.
The bias value for IN_1.
The proportional gain (multiplier) value for IN_1.
The bias value for IN_2.
The proportional gain (multiplier) value for IN_2.
The bias value for IN_3.
The proportional gain (multiplier) value for IN_3.
Determines the high limit of the compensation input.
Determines the low limit of the compensation input.
The set of 9 arithmetic functions applied as compensation to or
augmentation of the range extended input.
Specifies the time for a block value to match an input, output, or
calculated value or the time for dissipation of the internal balancing bias.
The bias value is used to calculate the output.
The gain value is used to calculate the output.
The maximum output value allowed.
The minimum output value allowed.
This alert is generated by any changes to the static data.
Used for all configuration, hardware, connection failure, or system
problem in the block. The cause of the alert is entered in the subcode
field. The first active alarm sets the active status in the status parameter.
When the Unreported status is cleared by the alert reporting test, other
block alert may be reported without clearing the Active status, if the
subcode has changed.
Description
Page 81