Honeywell ST700 User Manual page 56

Parameter
UNIT_TYPES
CUSTOM_UNIT
CUSTOM_TAG
DISPLAY_TEMPLATE
DECIMALS
PV_LOLIM
PV_HILIM
TREND_DURATION
PREF_UNITS
Attributes
Supported Modes
Alarm Types
Page 42 FOUNDATION Fieldbus ST 700 Pressure Transmitter User's Guide
Unit selection for screen process value. Appropriate units need
to be selected based on the configured parameter. If desired
units are not present, 'custom' may be selected. The
UNIT_TYPES is present in all the eight screens:
UNIT_TYPES_1, UNIT_TYPES_2, UNIT_TYPES_3,
UNIT_TYPES_4, UNIT_TYPES_5, UNIT_TYPES_6,
UNIT_TYPES_7 and UNIT_TYPES_8
Character string to represent custom units. This value is used
when Unit type of 'custom' is selected. Size: 8 Characters. The
CUSTOM_UNIT is present in all the eight screens:
CUSTOM_UNIT_1, CUSTOM_UNIT_2, CUSTOM_UNIT_3,
CUSTOM_UNIT_4, CUSTOM_UNIT_5, CUSTOM_UNIT_6,
CUSTOM_UNIT_7 and CUSTOM_UNIT_8
Tag to be displayed for the screen. Length: 14 Characters. The
CUSTOM_TAG is present in all the eight screens:
CUSTOM_TAG_1, CUSTOM_TAG_2, CUSTOM_TAG_3,
CUSTOM_TAG_4, CUSTOM_TAG_5, CUSTOM_TAG_6,
CUSTOM_TAG_7 and CUSTOM_TAG_8.
Represents the display screen template. Possible Values:
a) PV : Regular PV value is displayed
b) None: Screen will not be seen.
The DISPLAY_TEMPLATE is present in all the eight screens:
DISPLAY_TEMPLATE_1, DISPLAY_TEMPLATE_2,
DISPLAY_TEMPLATE_3, DISPLAY_TEMPLATE_4,
DISPLAY_TEMPLATE_5, DISPLAY_TEMPLATE_6,
DISPLAY_TEMPLATE_7 and DISPLAY_TEMPLATE_8.
Number of digits to display after the decimal point. Range: 0 - 3.
DECIMALS is present in all the eight screens: DECIMALS_1,
DECIMALS_2, DECIMALS_3, DECIMALS_4, DECIMALS_5,
DECIMALS_6, DECIMALS_7 and DECIMALS_8
Not applicable for ST 700.
Not applicable for ST 700.
Not applicable for ST 700.
Preferred Units.
The block supports the following modes:
•
AUTO (Automatic)
•
OOS (Out of Service).
The block supports standard block alarms (see section 3.2).
Description
Revision 2.0