Honeywell ST700 User Manual page 80

Parameter
MIN_GOOD
SELECTED
OP_SELECT
UPDATE_EVT
BLOCK_ALM
Page 66 FOUNDATION Fieldbus ST 700 Pressure Transmitter User's Guide
The minimum number of inputs which are "Good" is less than the value of
MIN_GOOD then set the OUT status to "Bad".
The integer indicating the selected input number.
An operator settable parameter to force a given input to be used.
This alert is generated by any change to the static data.
The block alarm is used for all configuration, hardware, connection failure,
or system problems in the block. The cause of the alert is entered in the
subcode field. The first alert to become active sets the Active status in the
Status parameter. As soon as the Unreported status is cleared by the
alert reporting task, another block alert may be reported without clearing
the Active status, if the subcode has changed.
Description
Revision 2.0