•
Manufacturer ID is represented as six hexadecimal digits (leading and trailing zeroes
are included).
•
Device Family is represented as four hexadecimal digits (leading and trailing zeroes
are included). For Multidomain devices, Device Family is replaced by Multidomain
Family.
•
Device Type is represented as four hexadecimal digits (leading and trailing zeroes are
included).
•
Leading "0"s are not suppressed for Manufacturer ID and Device Type.
•
Trailing blanks are stripped from Device Family, Domain Name, Software Name, and
Software Revision.
•
If Software Name or Software Revision is composed of all blanks, then the
underscore that would have preceded is omitted to prevent names with two adjacent
underscores, or from having the underscore character appear directly before the ".ffd".
For example, if the file contains the following header values,
Manufacturer ID = "48574C"
Device Type = "0003"
Domain Name = "DOM01"
Software Name = "FD-DOM"
Software Revision = "2-41"
Then the file name would be:
"48574C0003_0003_FD-DOM_FD-SW_2-41.ffd".
ATTENTION
In the ST 700 FF pressure transmitter, only communication board firmware
can be upgraded using the class 3 download. Display and sensor board
firmware upgrade is not possible through FF link in the current release
Revision 2.0
FOUNDATION Fieldbus ST 700 Pressure Transmitter User's Guide
Page 93