Step
4
The following dialog box appears,
Click OK.
5
The following dialog box appears,
Click OK.
ATTENTION
The device type – ST700FF_R1_0102 is used as an example.
6
The device is created in the Library-Containment window under the folder named
Honeywell.
7
From the Library-Containment window, drag and drop the device into the
corresponding FF link on the Project-Assignment window.
8
You are prompted to name the new function block. If you want to change the name
in the destination column, type the new name or if you want to use the default
name, click Finish.
The device is added on the FF link on the Project-Assignment window.
9
Right-click the new device and then click Load.
Revision 2.0
FOUNDATION Fieldbus ST 700 Pressure Transmitter User's Guide
Action
Page 9