Table of Contents
Advertisement
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE
MACHINE IMMEDIATELY! REPORT THE PROBLEM TO THE PROPER
MAINTENANCE PERSONNEL. DO NOT OPERATE THE MACHINE UNTIL
IT IS DECLARED SAFE FOR OPERATION.
Function Check
Perform the Function Check as follows:
1.
From the ground control panel with no load in the plat-
form:
a. Check that all function control switches and locks
are in place.
b. Operate all functions and check all limiting and cut-
out switches.
c. Check for proper lifting and lowering of the plat-
form.
d. If the platform extension is extended, check that the
extension retracts.
NOTE: Be sure the platform extension is retracted before lower-
ing.
e. Ensure that all machine functions are disabled
when the Emergency Stop Button is activated.
3121303
f. Check manual descent.
g. Check for proper lifting and lowering of the plat-
form.
h. Check the function of the protective scissor cage.
2.
From the platform control console:
a. Ensure that the control console is firmly secured in
the proper location.
b. Check that all guards protecting the switches are in
place.
c. Operate all functions
d. Check the high drive cut out switch by raising the
platform by 3.5 m (11.5 ft) on the 210-25 and 3.7 m
(12.1 ft) on the 245-25 and assure that the high
drive speed is cut out.
e. Ensure that all machine functions are disabled
when the Emergency Stop Button is pushed in.
f. Ensure that all LED's in the control box are working
properly.
g. Check that the platform extension extends and
retracts properly.
– JLG Lift –
2-5
Advertisement
Table of Contents
