Table of Contents
Advertisement
SECTION 3 - USER RESPONSIBILITIES AND MACHINE CONTROL
Engine Control
DO NOT OPERATE FROM GROUND CONTROL STATION WITH PERSON-
NEL IN THE PLATFORM EXCEPT IN AN EMERGENCY.
PERFORM AS MANY PRE-OPERATIONAL CHECKS AND INSPECTIONS
FROM THE GROUND CONTROL STATION AS POSSIBLE.
3
1. Start Assist
2. Engine Start
Figure 3-2. Engine Control
3-4
ehbelectronics
Vertragshandler
Start
3. Hourmeter
1. Start Assist - This push button is used to help assist
starting the machine in cold temperatures. (overrides 6
second crank limit of Engine Start Button)
2. Engine Start - A push button switch that, when
depressed, will start the engine. (crank time limited to 6
seconds before power supply required recycling)
3. Hourmeter - A meter used to measure the amount of
time the machine is in use.
1
2
– JLG Lift –
3121303
Advertisement
Table of Contents
