Setting Temperature Unit - Keysight U1211A User's And Service Manual

Changing the Default Settings 4

Setting temperature unit

To set the temperature unit, press Range/Auto for more than 1 second when you
are in setup mode. Four combinations of displayed unit(s) are available:
– Celcius only: °C single display.
– Celcius/Fahrenheit: °C/°F dual display; °C on primary, and °F on secondary.
– Fahrenheit only: °F single display.
– Fahrenheit/Celcius: °F/°C dual display; °F on primary, and °C on secondary.
Always set the temperature unit display for official requirements and comply
NOTE
with national law and standards.
Keysight U1211A, U1212A, and U1213A User's and Service Guide 73