Table of Contents
Advertisement
4
Changing the Default Settings
Default Factory Settings and Available Setting Options
The following table shows the various menu items with their respective default
settings and available options.
Table 4-2
Default factory settings and available setting options for each feature
Feature
66
Defaul t factory
Available setting options
setting
Minimum frequency measurement settings.
0.5 Hz
– Available settings: 0.5 Hz, 1 Hz, 2 Hz, or 5 Hz.
Beep frequency.
4800
– Available options: 600 Hz, 1200 Hz, 2400 Hz, 4800 Hz, or OFF.
Refresh hold.
– To enable this function, select a value within the range of 100 to 1000.
500
– To disable this function, select OFF.
Note: Select OFF to enable data hold (manual trigger)
Automatic power-off.
– To enable this function, select a value within the range of 1 minute to
15
99 minutes.
– To disable this function, select OFF.
Sets the timer to automatically turn off the LCD display backlight.
– To enable this function, select a value within the range of 1 minute to
30
99 minutes.
– To disable this function, select OFF.
Initial current or voltage measurement.
– To make AC measurement as the initial measurement, select AC.
– To make DC measurement as the initial measurement, select dC.
AC
Note:
– The default initial measurement of U1211A, U1212A, and U1213A is AC
measurement.
Default factory settings.
rESt
Select REST to reset the clamp meter to its default factory settings.
Keysight U1211A, U1212A, and U1213A User's and Service Guide
Advertisement
Table of Contents
