The Rotary Switch At A Glance; Figure 1-6 Clamp Meter Rotary Switch - Keysight U1211A User's And Service Manual

1 Getting Started

The rotary switch at a glance

Figure 1-6
The rotary switch allows you select desired measurements. To cycle between
measurements after rotating to a particular measurement function, press SHIFT.
Measurement function
[a] The temperature measurement and DC current measurement are only available for U1212A and U1213A clamp meters.
[b] The AC + DC measurement is only available for U1213A clamp meter.
30
Clamp meter rotary switch
Description
Power off.
[a] [b]
AC, DC , or AC + DC current measurements. By default, measurement is set to AC current.
[b]
AC, DC, or AC + DC voltage measurements. By default, measurement is set to AC voltage.
Resistance measurement, audible continuity test, or temperature
measurement is set to resistance measurement.
Diode or capacitance measurement. By default, measurement is set to diode measurement.
Keysight U1211A, U1212A, and U1213A User's and Service Guide
[a]
measurement. By default, the