Data Hold (Trigger Hold); Enabling The Data Hold Function - Keysight U1211A User's And Service Manual

3 Functions and Features

Data Hold (Trigger Hold)

The data hold operation allows you to capture and hold a reading instantaneously
through trigger function. You will have to enable the data hold in setup menu
before using the data hold operation. See
on page 70 for more information.

Enabling the data hold function

1 Ensure that the data hold operation is enabled in the setup menu.
2 Press Hold/Max Min to enable the data hold operation.
3 The annunciator display will indicate DH and the data hold function is enabled.
4 Press Hold/Max Min again to trigger.
5 Press Hold/Max Min for more than 1 second to exit the data hold operation.
52 Keysight U1211A, U1212A, and U1213A User's and Service Guide
"Setting Data Hold/Refresh Hold mode"