"Cleaning tool" Dialog Box
This dialog box is used when cleaning the machine. It allows the rotary axis unit, spindle, and other parts to be moved. To
verify the operation, place the mouse pointer over the button to switch the illustration.
P. 34"Cleaning after Milling Finishes"
Display
Dust collector ON/OFF
Front
Rear
Reverse side
Spindle
Explanation
Turns the dust collector ON/OFF.
(For dust collectors with a linking function and connected to the expansion port with
a linking cable.) For details on the dust collector, see the DWX-51D "Setup Guide."
Moves the rotary axis unit forward. Use this function when cleaning the rotary axis unit.
Moves the rotary axis unit to the back. Use this function when cleaning the back of
the milling area.
Turns the clamp over. Use this function when cleaning the back side of the clamp.
Moves the spindle unit to a visible location. Use this function when cleaning around
the spindle unit.
VPanel Window and Functions
1. Operation Screen
15