Step 3: Outputting Milling Data - Roland DWX-51D User Manual

STEP 3: Outputting Milling Data

* You can also use commercial CAM software to output milling data. For information on compatible CAM software, contact
your authorized Roland DG Corporation dealer.
WARNING
WARNING
Procedure




Verify that the workpiece and the milling bur are set in the machine.

P. 26"STEP 2: Attaching the Milling Bur"
Be sure to turn on the dust collector.
Milling Waste and workpieces are flammable and toxic.
Never use a vacuum cleaner to clean up milling Waste.
Picking up fine cuttings using an ordinary vacuum cleaner may
result in a fire or explosion.
In the top window of VPanel, select the
machine to output.
Click the radio button to the left of the name of the
machine to operate.
Click .
The "Output a file" window will appear.
Click "Add."
The "Open" window will appear.
Select the milling data, and click "Open."
The selected milling data is displayed in the data
list of the "Output a file" window.
 
Repeat steps to to output the milling data
continuously.
Starting Milling
27
2. Milling