Stocker Settings" Dialog Box - Roland DWX-51D User Manual

VPanel Window and Functions

"Stocker settings" Dialog Box

You can use this dialog box to configure the settings to use two stockers as a single set and alternately use two milling burs
of the same type.If one milling bur reaches its replacement time, the milling machine switches to the other milling bur au-
tomatically, so milling can be continued for a long time without any loss in milling quality.This function is called Intelligent
Tool Control.
Symbol Explanation
The stocker combination is displayed here.On the screen shown here, Pattern 3 has been selected with
Intelligent Tool Control is used with the following stocker number combinations: 1 and 6, 2 and 7, and 3 and 8.
Select the stocker combination pattern.
P. 30"Automatically Switching Out the Worn Milling Bur (Intelligent Tool Control)"

The details of the stocker combination pattern selected with
14
1. Operation Screen
are displayed here.
.