Roland DWX-51D User Manual page 42

Periodic Maintenance





42
3. Maintenance
Collet
Spanner
Detection
pin
Click the [Maintenance] tab.
Click "Open collet."
Click [OK].
Moving the spindle unit will open the collet.
The window shown in the figure appears.
Click [OK].
Fit the spanner onto the collet.
Insert the detection pin into the collet.
If the detection pin cannot be inserted, repeat the opera-

tion in .
Use the included spanner and keep the detection pin
inserted. If the detection pin is not inserted, the col-
let may become deformed, resulting in lower milling
accuracy.
Tighten the collet with the spanner while holding
the detection pin.
Tightening is sufficient once the spanner and the tip
of the spindle unit (shaded portion in the figure to the
left) begin to rotate together.