Mail" Tab - Roland DWX-51D User Manual

VPanel Window and Functions

"Mail" Tab

Settings in this tab can be configured so that a notification e-mail is sent when milling finishes, when an error occurs, or
when maintenance is complete. When more than one machine is connected, all of the machines become the targets for the
settings. Check "Use mail notification" to enter each item.
Display
Receiver address
Sender address
Server host name
Server port number
Use SSL connection
Use SMTP authentication
User name / Password
Click "Send test" to send a test e-mail. If the following e-mail is received at the address specified in "Receiver address," con-
figuration of the settings is complete.
Subject: <Machine name> Body: Test
If the e-mail fails to send, the "Windows Script Host" error message will be displayed. Check the content in the input fields again.
Important
* It may be impossible to send e-mails because of security software settings or the like. If e-mails cannot be sent, check the
settings of the security software being used as anti-virus software or for a similar purpose.
* For detailed information about the e-mail settings, consult your network administrator.
* VPanel does not support TLS connections (STARTTLS).
10
1. Operation Screen
Explanation
The recipient's e-mail address. You can input more than one address by
separating with a comma.
This becomes the sender's e-mail address. Input the mail address being used
on the computer with VPanel installed.
Enter the name of the outgoing mail server (SMTP server name) for the e-mail
address input for the sender's address.
Enter the outgoing mail server port number for the e-mail address input for
the sender's address.
Check to use a security-protected connection (SSL). Configure the outgoing
mail server settings for the e-mail address input for the sender's address.
Check to use authentication when sending e-mails. Input the user name and
password for authentication. Configure the outgoing mail server settings for
the e-mail address input for the sender's address.