Milling Quality Problems; The Milled Surface Is Not Attractive; There Is A Line Of Level Difference In The Milling Results; Chipping (Edges Of Milling Products Become Chipped) Occurs - Roland DWX-51D User Manual

Milling Quality Problems

The Milled Surface is Not Attractive

Is the workpiece firmly secured in
place?
Is the milling bur worn?
Are the milling conditions too
strict?

There is a Line of Level Difference in the Milling Results

Is the machine out of correction?
Are the CAM milling settings cor-
rect?

Chipping (Edges of Milling Products Become Chipped) Occurs

Is the installation base of the ma-
chine secure?
Is the workpiece firmly secured in
place?
Is the milling bur worn?
Are the milling conditions too
strict?
Check the mounting condition of the workpiece.
Fasten the workpiece in place securely so that it will
not slip out of place or come loose because of mill-
ing bur pressure or vibration during milling.
If the same milling bur is used for milling for a long
period of time, it will become worn and affect milling
results. Try replacing the milling bur with a new one.
The work time of the milling bur can also be man-
aged in VPanel.
Strict milling conditions may affect milling results.
Review the CAM milling conditions.
The origin point may become out of position due to
prolonged use or relocating the machine, which can
result in a line of level difference. Perform automatic
correction. If expected results cannot be obtained
even after performing automatic correction, perform
manual correction. With manual correction, changing
the Y value in Origin point may improve the situation.
Depending on the milling conditions, a line of level
difference may occur. Review the CAM milling condi-
tions.
The vibration from milling can shake the installation
base. Install the machine in a level and stable loca-
tion.
Check the mounting condition of the workpiece. If
the workpiece is not mounted correctly, it may come
loose during milling and may become misaligned.
If the same milling bur is used for milling for a long
period of time, it will become worn and affect milling
results. Try replacing the milling bur with a new one.
The work time of the milling bur can also be man-
aged in VPanel.
Strict milling conditions may affect milling results.
Review the CAM milling conditions.
P. 20
P. 12
-
P. 38
-
-
P. 20
P. 12
-
51
4. Troubleshooting