Roland DWX-51D User Manual page 45

Cleaning the Bowl
WARNING
WARNING
Procedure

Stop the supply of compressed air.



Loosen

After making sure that the bowl is completely dry, retighten the bowl.

Attach the regulator to the machine.
Be sure to bleed off the air pressure before removing the regulator bowl.
Failure to do so may result in a rupture or components flying off.
Before removing or attaching the regulator and before performing maintenance, make
sure that the bowl is securely attached.
If the bowl is not properly attached, it may come flying off when compressed air is supplied.
Tighten
Bowl
Loosen the screws about 3 turns in the locations
shown in the figure to the left using a torque
driver. (2 locations)
Remove the regulator.
Remove the bowl from the regulator.
Wash the bowl using a neutral detergent.
WARNING
Clean the regulator bowl using a neutral de-
tergent.Never use solvents such as gasoline,
alcohol, or thinner.
Using solvents may degrade the bowl and may result
in a rupture.
Periodic Maintenance
45
3. Maintenance