Table of Contents
Advertisement
Care and maintenance
3
Lubricating
.09.03
70
Fig. 9 - 02
Before commissioning the machine, fi ll in oil through hole 1 until the oil level
indicator 2 is at the "MAX" marking.
The oil level is controlled by sensor.
When the minimum oil level is reached, key 3 on the machine head shines red
If required, fi ll oil into the tank through hole 1.
Oil level indicator 2 must not exceed the "MAX" marking.
Only use oil with a medium viscosity of 22.0 mm²/s at 40° C and a density
of 0.865 g/cm³ at 15°C!
We recommend PFAFF sewing-machine oil, part No. 280-1-120 144.
3
2
1
Advertisement
Table of Contents
