Table of Contents
Advertisement
Input
Input Scan Options with wildcard characters in the program-header
1. With input of $$ before a character string or $$ after a character string, only the character
Sample:
Header input: $$123456789$$
Bar code :
Bar code :
Bar code
2. Enter @ @ @ in input fi eld 3.
● Select the data for printing the end label (value "1" = print label each time;
● Select seam section from sector 1.
● If necessary, delete selected seam section.
● If necessary, insert seam section after the selected seam section.
● With function 2 specify the following for the selected seam sector.
● Call up the menu for entering the sewing parameters and enter the appropriate values,
● Call up the menu for entering the action at beginning of the seam sector. Depending on
20
string is controlled, true or not true.
All characters before or after the character string are only documented
888881234567895555
77777712345678933333
888881234567805555 nicht OK, Error not documented in the protocol.
The control will not carry out any adjustments, IDs will only be logged.
value "10" = print label every tenth time).
- Activate/deactivate docu-seam sector
- Activate/deactivate missed stitch recognition function
- Activate/deactivate edge guide recognition function
- Specify thread strength, see Chapter 2.04.05 Sensors
see Chapter 2.04.01 Sewing parameter input.
the action selected, the symbol may be different. In this example the "double start bar-
tacks" action is selected.
OK documented in the protocol
OK documented in the protocol
Advertisement
Table of Contents
