Table of Contents
Advertisement
Maintenance
NOTE: Turn off the machine and remove the power cord when performing maintenance on
the machine.
Cleaning and Lubricating the Machine
Only use light sewing machine oil in the powerquilter™ 1600. Internal oiling is not necessary on the
powerquilter™ 1600 except when the machine is taken to a service technician for routine maintenance
and cleaning. The hook assembly, however, needs regular lubricating. Failure to keep the hook assembly
lubricated can cause severe damage to the machine.
To lubricate, turn off the machine. Remove the
bobbin and case before oiling. Clean around the
hook assembly with a soft brush to remove lint. Put
a very small drop of oil on the hook in the region
where the bobbin basket assembly and the rotating
hook meet. The bobbin basket is the portion of the
hook that the bobbin case snaps into. The bobbin
basket remains stationary while the hook rotates
around the basket. The oil lubricates the region
where these two components interlock. A drop of
oil in the region indicated will work its way back
into the interlocking area of the hook and bobbin
basket.
The frequency of lubrication depends upon the usage of the machine. Lubricating is recommended before
running the machine if it has not been used regularly, or every other bobbin change if used frequently.
After oiling, always stitch through a scrap piece of fabric, as oil may cling to thread.Over-oiling can cause
excess dripping from the bobbin assembly. Lack of lubricant may be noticed by a change in the sound of
the machine and will affect stitch quality.
Cleaning the Touch-Screen Display
Use a soft rag dampened with isopropyl alcohol to gently wipe the display and remove any marks.
Never use any other chemicals to clean your display as they may adversely affect the touch-screen
response and clarity.
™
| 23
powerquilter
1600 Quilting Machine User's Guide
Advertisement
Table of Contents
