3
Controls
.06
3
On/off switch / Sewing lamp switch
.06.01
1
Fig. 6 - 01
3
Power bar
.06.02
Fig. 6 - 02
2
1
● To switch the control system of the
machine on or off, turn main switch 1.
Please note that when
activating the machine, the
machine must be activated
fi rst, and then the power bar.
● Switch the sewing lamp, which is inte-
grated in the machine head, on or off by
operating switch 1.
● Switch 2 regulates the brightness of the
sewing lamp.
● Switch 1 is used to switch the complete
power supply of the PC components (PC,
touch-screen monitor, hand-held scanner,
printer etc.) on or off.
If an individual device is not
activated after the power bar
has been switched on, please
check, if the switches of the in-
dividual devices are activated.
128-0
Controls
45