Table of Contents
Advertisement
2
Operating modes
.03.02
Selecting and confi guring seam programs
Functions for selecting, processing and creating seam programs are called up, see Chapter
2.04 Creating seam programs.
Tools
A menu is called up for selecting functions for the sewing head, control unit and printer.
Change of user
The box for entering the user is called up.
Desktop
The application is concluded and the Windows desktop is called up. This function is only dis-
played for the logged-in administrator or supervisor.
Shut down the computer
The application is concluded and the computer is shut down. This function is only displayed
for the logged-in operator or guest.
2
Tools
.03.03
Parameterization
A menu is called up for adjusting the parameters, see Adjustment Manual.
Service
The service menu is called up, see Chapter 2.05 Service.
Calibration
A menu is called up for calibrating the machine, see Calibration Instructions.
Cold start
A cold start is carried out, see Chapter 2.06 Cold Start.
Users – Rights
A menu is called up for entering users and rights, see Chapter 2.07 Users – Rights.
Equipment and Interfaces
A menu is opened for allocating work aids to corresponding COM-interfaces, see
Chapter 2.10 Defi ning options and interfaces.
Backup and Restore
A menu is called up for carrying out a backup or a restoration, see Chapter 2.08 Back-up –
Restore.
Evaluation and print function
A selected docu-seam with all relevant values is displayed.
Label editor
A menu is called up for editing labels, see Chapter 2.09 Label editor.
Input
17
Advertisement
Table of Contents
