Table of Contents
Advertisement
Setting up
3
Setting up
.07
3
Log-in
.07 .01
● Switch on the machine on the power bar and wait until the PC has started.
● Tap on the input box 1.
● Enter user.
● Confi rm input.
3
Language selection
.07 .02
● Carry out the log-in.
● Call up the menu for language selection.
● Select the desired language (fl ag).
52
All instructions and regulations in this instruction manual must be observed.
Special attention should be given to all safety regulations.
All setting-up work may only be carried out by appropriately trained personnel.
Benutzer-ID
Max Mustermann
A box for entering the user appears.
If the user has an ID-card with appropriate barcode, alternatively the user can
be entered with the use of the hand-held scanner.
The selected language is immediately taken over for the complete application.
Industrial
1
Advertisement
Table of Contents
