Table of Contents
Advertisement
4
Knife pressure
.06.03
Requirement
When the front edge of thread catcher 3 is 5 – 6 mm in front of the knife blade, the knife
4 should be touching the catcher edge with slight pressure.
Fig. 4 - 17
● Bring the take-up lever to its b.d.c and press roller lever 1 into the control cam 2.
● Turn the balance wheel until the front edge of catcher 3 is at a distance of 5 – 6 mm from
the blade of knife 4.
● Swing knife bearing 5 (screw 6) in accordance with the requirement.
3
1
After completing the adjustment, recheck the position of the thread catcher in
accordance with Chapter 4.06.02 Position and height of the thread catcher.
4
2
Adjustment
5
6
93
Advertisement
Table of Contents
