Adjustment Of Edge Guide Photocell - Pfaff POWERLINE 3741 Instruction Manual

Adjustment
4

Adjustment of edge guide photocell

.07 .05
Control:
In the menu Tools,Service,In/Outputs (cap.4.10) check Input 16
Display without material
102
3
Fig. 4 - 20
Fig. 4 - 25
LED control
● The LED 1 and 2 should be "on" without
Material under the refl ector area 3.
● The LED 1 and 2 should be "off" with
Material under the refl ector area 3.
Start auto-teach function
● With no material under the refector 3,
1
press the button 4 for about 3 sec. until
the LED 2 starts fl ashing slowly.
2
● Confi rm by pressing button 4.
● Cover the refl ector 3 with white materi-
al or paper.
4
● Finish the auto-teach function by pres-
sing button 4 again.
Display with material
Fig. 4 - 26
16