Table of Contents
Advertisement
● Select the action and enter/change the appropriate values, see Chapter 2.04.02 Input of
action at beginning of seam sector.
● Call up the menu for the input of the recognition of the end of the seam sector. Depend-
ing on the function selected, the symbol may be different. In this example the "recogni-
tion of the end of the seam section by knee switch" is selected.
● Select the function for the recognition of the end of the seam sector and, if necessary,
enter/change the appropriate values, see Chapter 2.04.03 Input of end of seam sector.
● Call up the menu for entering the action at the end of the seam sector. Depending on the
action selected, the symbol may be different. In this example the "condensed end stitch-
es" action is selected.
● Select the action and, if necessary, enter the label number, see Chapter 2.04.04 Input of
action at end of seam sector.
● If necessary, shift the seam sector within the seam.
● After entering/editing the desired seam sectors, save the seam program and quit the
seam program function.
● Call up the production function.
Input
21
Advertisement
Table of Contents
