Lubricating - Pfaff POWERline 2595 BASIC Instruction Manual

Care and maintenance
9

Lubricating

.03
Max
2
Min
1
Fig. 9 - 02
Before commissioning the machine, fi ll in oil through hole 1 until the oil level
indicator 2 is at the "MAX" marking.
PFAFF 2595 and 2596 BASIC
Check the oil level daily before starting the machine!
The level of the oil in indicator 2 must not sink below the "MIN" marking and
not exceed the "MAX" marking.
If required, fi ll oil into the tank through hole 1.
PFAFF 2595 and 2596 PLUS
The oil level is controlled by sensor.
When the minimum oil level is reached, key B on the machine head shines red
(see Chapter 7.03 Keys on the machine head).
If required, fi ll oil into the tank through hole 1.
Oil level indicator 2 must not exceed the "MAX" marking.
Only use oil with a medium viscosity of 22.0 mm²/s at 40° C and a density
of 0.865 g/cm³ at 15°C!
We recommend PFAFF sewing-machine oil, part No. 280-1-120 144.
31