Table of Contents
Advertisement
Input
2
Input of end of seam sector
.04.03
● Call up the input for the recognition of the end of the seam sector, see Chapter 2.04 Cre-
Description of the functions
End of seam sector by pedal function
After function 1 has been selected, the end of the seam sector is started with the pedal
function.
End of seam sector by knee switch
After function 2 has been selected, the end of the seam sector is started with the pedal
function. The minimum number of stitches for the seam sector is defi ned with sector 7, the
maximum number with sector 8.
End of seam sector by stitch counting
After function 3 has been selected and following the input of the value for the number of
stitches, the end of the seam sector is started after the corresponding number of stitches
have been sewn.
End of seam sector by seam length
After function 4 has been selected and following the input of the value for the seam length,
the end of the seam sector is started after the corresponding seam length has been sewn.
End of seam sector by sensor with stitch counting
After function 5 has been selected and following the input of the values for the maximum
and minimum number of stitches, the end of the seam sector is started by sensor according
to the number of stitches entered.
End of seam sector by sensor with seam length
After function 6 has been selected and following the input of the values for the maximum
and minimum seam length, the end of the seam sector is started by sensor within the corre-
sponding lengths given.
Conclude the input
The input is concluded by taking over the selection and the entered values.
Stop the input
The input is concluded without taking over the selection and the entered values.
24
ating seam programs.
1 2 3 4 5 6
7
8
Advertisement
Table of Contents
