Moving The Cursor; Changing A Value; Assigning A Name - Roland JUNO-G Owner's Manual

Basic Operation of the JUNO-G

Moving the Cursor

A single screen or window displays multiple parameters or items for
selection. To edit the setting of a parameter, move the cursor to the
value of that parameter. To select an item, move the cursor to that
item. When selected with the cursor, a parameter value or other
selection is highlighted.
fig.CursorScreen
Move the cursor with the [
[ ]: moves the cursor up.
[ ]: moves the cursor down.
[ ]: moves the cursor to the left.
[ ]: moves the cursor to the right.
• If you hold down one cursor button while you also press the
cursor button for the opposite direction, the cursor will move
more rapidly in the direction of the first-pressed cursor button.
• When you press [ENTER], the value of the parameter selected
by the cursor may appear in a list. This is convenient when you
want to see what your choices are.

Changing a Value

To change the value, use the VALUE dial or the [INC] [DEC]
buttons.
fig.VALUE
In each screen of the JUNO-G, you can use the cursor buttons to
move the area displayed as highlighted, and modify its value.
VALUE Dial
Turning the VALUE dial clockwise increases the value,
counterclockwise decreases the value.
• Holding down [SHIFT] as you move the VALUE dial increases
value increments so you can make large value changes faster.
[INC] and [DEC]
Pressing [INC] increases the value, and [DEC] decreases it.
• Keep the button pressed for continuous adjustment.
• For faster value increases, keep [INC] pressed down and press
[DEC]. For decreasing value faster, keep [DEC] pressed down
24
Cursor
], [ ], [ ] and [ ] (cursor buttons).
and press [INC].
• If you press [INC] or [DEC] while holding down [SHIFT], the
value increments will get bigger.
When the cursor is located at a parameter value, press [ENTER]
to display a window where you can set the value. Use [
to select a value, and then press [ENTER] to finalize the setting.

Assigning a Name

On the JUNO-G, you can assign names to each patch, rhythm set,
performance, Song and Sample. The procedure is the same for any
type of data.
fig.PatchName
1.
Press [ ] [ ] to move the cursor to the location where you
wish to input a character.
2.
Turn the VALUE dial, or press [INC] [DEC] to specify the
character.
• [F2 (TYPE)]: Selects the type of character. Each time you
press this, you will alternately select the first
character of a character set: uppercase (A),
lowercase (a), or numerals and symbols (0).
• [F3 (DELETE)]: Deletes the character at the cursor location.
• [F4 (INSERT)]: Inserts a space at the cursor location.
• [ ] or [ ]: Move the cursor.
• [ ], [ ]: Switch between uppercase and lowercase
letters.
* If you decide to discard your input, press [F5 (CANCEL)].
Available Characters/Symbols
space, A–Z, a–z, 0–9, ! " # $ % & ` ( ) * + , - . / : ; < = > ? @ [ \ ] ^
_ ` { | }
From a naming screen you can press [MENU] and select "1.
Undo" to return the name to what it was before you changed it.
From [MENU] you can select "2. To Upper" or press [
change the character at the cursor to uppercase. From [MENU]
you can select "3. To Lower" or press [
character at the cursor to lowercase. From [MENU] you can
select "4. Delete All" to clear all the characters you were
inputting.
Song file names may not contain lowercase characters or certain
symbols (" * + , . / : ; < = > ? [ \ ] |).
] [ ]
] to
] to change the