Saving Rhythm Sets You've Created (Write) - Roland JUNO-G Owner's Manual

5.
Press [F6 (EXEC)] to execute the copy operation.
* To cancel, press [F5 (CANCEL)].
The Compare Function
For the Rhythm Tone Copy and Rhythm Set Save operations,
you can use the Compare function.
If you want to play the copy-source or write-destination rhythm
set, press [F4 (COMPR)] to add a check mark (✔). Now you can
play the copy-source or write-destination rhythm set from the
keyboard.
* The rhythm set auditioned using the Compare function may
sound slightly different than when it is played normally.
Saving Rhythm Sets You've
Created (Write)
Changes you make to sound settings are temporary, and will be lost
if you turn off the power or select another sound. If you want to keep
the modified sound, you must save it in the internal USER group
(user memory) or CARD group (memory card).
When you edit the patch settings, an "*" will appear in the PATCH
PLAY screen.
When you perform the save procedure, the data that previously
occupied the save destination will be lost.
1.
Edit the rhythm set.
2.
Press EDIT [WRITE].
The WRITE MENU screen appears.
3.
Press [F2 (PAT/RHY)].
* Alternatively, you can use [
then press [ENTER].
The RHYTHM SET NAME screen appears.
4.
Assign a name to the rhythm set.
For details on assigning names, refer to p. 24.
5.
When you have finished inputting the name, press [F6
(WRITE)].
A screen will appear, allowing you to select the write-
destination patch.
6.
Use the VALUE dial, [INC] [DEC], or [
[F2 (CARD)] to select the write destination and patch number.
* By pressing [F4 (COMPR)] to add a check mark (✔), you can check
the write-destination patch (Compare function).
] [ ] to select "Patch/Rhythm," and
] [ ] and [F1 (USER)]
Creating a Rhythm Set
7.
Press [F6 (WRITE)].
A message will ask you for confirmation.
8.
Press [F6 (EXEC)] to execute the save operation.
* To cancel, press [F5 (CANCEL)].
Never switch off the JUNO-G while data is being saved.
One-shot Waveform and Loop Waveform
The internal waveforms of the JUNO-G fall into the following two
groups.
One-shot:
These waveforms contain sounds that have short decays. A one-shot
waveform records the initial rise and fall of the sound.
The JUNO-G also contains many other one-shot waveforms that are
elements of other sounds. These include attack components such as
piano-hammer sounds and guitar fret noises.
* It is not possible to use the envelope to modify a one-shot waveform to
create a decay that is longer than the original waveform, or to turn it
into a sustaining sound.
Loop:
These waveforms include sounds with long decays as well as
sustained sounds. Loop waveforms repeatedly play back (loop) the
portion of the waveform after the sound has reached a relatively
steady state.
The JUNO-G's looped waveforms also include components of other
sounds, such as piano-string resonant vibrations and the hollow
sounds of brass instruments.
The following diagram shows an example of sound (electric organ)
that combines one-shot and looped waveforms.
fig.Waveform1.e
TVA ENV for looped Organ TVA ENV for one-shot Key
waveform (sustain portion) -click waveform (attack portion)
Level
+
Time
Note off
Resulting TVA ENV
change
=
Note off
51