Midi Implementation - Roland JUNO-G Owner's Manual

MIDI Implementation

1. Data Reception (Sound Generator Section)
■Channel Voice Messages
* Not received in Performance mode when the Receive Switch parameter (PERFORM/
MIDI) is OFF.
●Note off
Status 2nd byte
8nH kkH
9nH kkH
n = MIDI channel number:
kk = note number:
vv = note off velocity:
* Not received when the Envelope Mode parameter (PATCH/CONTROL and RHYTHM/
COMMON) is NO-SUS.
●Note on
Status 2nd byte
9nH kkH
n = MIDI channel number:
kk = note number:
vv = note on velocity:
●Polyphonic Key Pressure
Status 2nd byte
AnH kkH
n = MIDI channel number:
kk = note number:
vv = Polyphonic Key Pressure:
* Not received in Performance mode when the Receive Poly Key Pressure parameter
(PERFORM/MIDI) is OFF.
●Control Change
* If the corresponding Controller number is selected for the Patch Control Source 1, 2, 3 or
4 parameter (PATCH/CONTROL/CTRL1-4), the corresponding effect will occur.
* If a Controller number that corresponds to the System Control Source 1, 2, 3 or 4
parameter (SYSTEM/CTRL) is selected, the specified effect will apply if Patch Control
Source 1, 2, 3 or 4 parameter (PATCH/CONTROL/CTRL1-4) is set to SYS-CTRL1, SYS-
CTRL2, SYS-CTRL3 or SYS-CTRL4.
❍Bank Select (Controller number 0, 32)
Status 2nd byte
BnH 00H
BnH 20H
n = MIDI channel number:
mm, ll = Bank number:
* Not received in Performance mode when the Receive Bank Select (PERFORM/MIDI) is
OFF.
* The Performances, Patches, and Rhythms corresponding to each Bank Select are as
follows.
* The SRX series corresponding to each Bank Select are to see the SRX series owner's
manual.
BANK SELECT | PROGRAM | GROUP
MSB | LSB | NUMBER |
-----+-----------+-----------+----------------------+-----------
000 | | 001 - 128 | GM Patch
: | | |
063 | | 001 - 128 | GM Patch
085 | 000 | 001 - 064 | User Performance
| 032 | 001 - 064 | Card Performance
| 064 | 001 - 064 | Preset Performance
086 | 000 | 001 - 032 | User Rhythm
| 032 | 001 - 032 | Card Rhythm
| 064 | 001 - 036 | Preset Rhythm
087 | 000 | 001 - 128 | User Patch
| 001 | 001 - 128 | User Patch
| 032 | 001 - 128 | Card Patch
| 033 | 001 - 128 | Card Patch
| 064 | 001 - 128 | Preset Patch A
| 065 | 001 - 128 | Preset Patch B
| : | |
092 | 000 - | 001 - | SRX Rhythm
| : | |
093 | 000 - | 001 - | SRX Patch
| : | |
120 | | 001 - 057 | GM Rhythm
121 | 000 - | 001 - 128 | GM Patch
210
3rd byte
vvH
00H
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
01H - 7FH (1 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
mmH
llH
0H - FH (ch.1 - 16)
00 00H - 7F 7FH (bank.1 - bank.16384)
| NUMBER
|
| 001 - 256
|
| 001 - 256
| 001 - 064
| 001 - 064
| 001 - 064
| 001 - 032
| 001 - 032
| 001 - 036
| 001 - 128
| 129 - 256
| 001 - 128
| 129 - 256
| 001 - 128
| 001 - 128
: |
| 001 -
: |
| 001 -
: |
| 001 - 009
| 001 - 256
❍Modulation (Controller number 1)
Status 2nd byte
BnH 01H
n = MIDI channel number:
vv = Modulation depth:
* Not received in Performance mode when the Receive Modulation parameter
(PERFORM/MIDI) is OFF.
❍Breath type (Controller number 2)
Status 2nd byte
BnH 02H
n = MIDI channel number:
vv = Control value:
* JUNO-G receives it as ACTIVE EXPRESSION.
❍Foot type (Controller number 4)
Status 2nd byte
BnH 04H
n = MIDI channel number:
vv = Control value:
❍Portamento Time (Controller number 5)
Status 2nd byte
BnH 05H
n = MIDI channel number:
vv = Portamento Time:
* In Performance mode, the Part Portament Time parameter (PERFORM/PART) will
change.
❍Data Entry (Controller number 6, 38)
Status 2nd byte
BnH 06H
BnH 26H
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB
❍Volume (Controller number 7)
Status 2nd byte
BnH 07H
n = MIDI channel number:
vv = Volume:
* Not received in Performance mode when the Receive Volume parameter (PERFORM/
MIDI) is OFF.
* In Performance mode, the Part Level parameter (PERFORM/PART) will change.
❍Balance (Controller number 8)
Status 2nd byte
BnH 08H
n = MIDI channel number:
vv = Balance:
❍Panpot (Controller number 10)
Status 2nd byte
BnH 0AH
n = MIDI channel number:
vv = Panpot:
* Not received in Performance mode when the Receive Pan parameter (PERFORM/MIDI)
is OFF.
* In Performance mode, the Part Pan parameter (PERFORM/PART) will change.
❍Expression (Controller number 11)
Status 2nd byte
BnH 0BH
n = MIDI channel number:
vv = Expression:
* Not received when Tone Receive Expression parameter (PATCH/CONTROL or
RHYTHM/COMMON) is OFF.
* Not received in Performance mode when Receive Expression parameter (PERFORM/
MIDI) is OFF.
Model: JUNO-G
Date: Feb. 1, 2006
Version: 1.00
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
mmH
llH
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (Left - Center - Right),
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)