Roland JUNO-G Owner's Manual page 148

Adding Effects
59: TELEPHONE
fig.MFX-59
L in
Telephone
R in
Telephone
Parameter Value
Voice 0–15
Quality #
Treble -15– +15 dB
Balance # D100:0–
D0:100W
Level 0–127
60: PHONOGRAPH
Simulates a sound recorded on an analog record and played back on
a record player. This effect also simulates the various types of noise
that are typical of a record, and even the rotational irregularities of
an old turntable.
fig.MFX-60
Balance D
L in
Phonograph
Phonograph
R in
Balance D
Parameter Value
Signal 0–127
Distortion
Frequency 0–127
Range
Disc Type LP, EP, SP
Scratch 0–127
Noise Level
Dust Noise 0–127
Level
Hiss Noise 0–127
Level
Total Noise 0–127
Level #
Wow 0–127
Flutter 0–127
Random 0–127
Total Wow/ 0–127
Flutter #
Balance # D100:0W–
D0:100W
Level 0–127
148
L out
R out
Explanation
Audio quality of the telephone voice
Bandwidth of the telephone voice
Volume balance between the direct
sound (D) and the effect sound (W)
Output level
L out
Balance W
Balance W
R out
Explanation
Depth of distortion
Frequency response of the playback sys-
tem
Decreasing this value will produce the
impression of an old system with a
poor frequency response.
Rotational speed of the turntable
This will affect the frequency of the
scratch noise.
Amount of noise due to scratches on the
record
Volume of noise due to dust on the
record
Volume of continuous "hiss"
Volume of overall noise
Depth of long-cycle rotational irregulari-
ty
Depth of short-cycle rotational irregular-
ity
Depth of indefinite-cycle rotational irreg-
ularity
Depth of overall rotational irregularity
Volume balance between the direct
sound (D) and the effect sound (W)
Output level
61: PITCH SHIFTER
(Feedback Pitch Shifter)
A stereo pitch shifter.
fig.MFX-61
L in
Pitch Shifter
Pitch Shifter
R in
Parameter Value
Coarse #1 -24– +12 semi
Fine #1 -100– +100 cent
Delay Time 0–1300 ms, note
Feedback # -98– +98 %
Low Gain -15– +15 dB
High Gain -15– +15 dB
Balance # D100:0W–
D0:100W
Level 0–127
62: 2VOICE PITCH SHIFTER
Shifts the pitch of the original sound. This 2-voice pitch shifter has
two pitch shifters, and can add two pitch shifted sounds to the
original sound.
fig.MFX-62
L in
Level 1
2Voice Pitch Shifter
Level 1
R in
Parameter Value
Pitch 1: -24-+12 semi
Coarse #1
Pitch 1:Fine #1 -100-+100 cent
Pitch 1:Delay 0–1300 ms, note
Pitch 1:Feed- -98– +98 %
back #
Pitch 1:Pan # L64-63R
Pitch 1:Level 0–127
Pitch 2: -24-+12 semi
Coarse #2
Pitch 2:Fine #2 -100-+100 cent
Pitch 2:Delay 0–1300 ms, note
Pitch 2:Feed- -98– +98 %
back #
Pitch 2:Pan # L64-63R
Pitch 2:Level 0–127
Low Gain -15– +15 dB
High Gain -15– +15 dB
2-Band EQ L out
2-Band EQ R out
Explanation
Adjusts the pitch of the pitch
shifted sound in semitone steps.
Adjusts the pitch of the pitch
shifted sound in 2-cent steps.
Adjusts the delay time from the
direct sound until the pitch shift-
ed sound is heard.
Adjusts the proportion of the
pitch shifted sound that is fed
back into the effect. Negative (-)
settings will invert the phase.
Gain of the low range
Gain of the high range
Volume balance between the di-
rect sound (D) and the pitch
shifted sound (W)
Output Level
Balance D
L out
Pan 1 L
Balance W
Pan 1 R
Pan 2 L
Balance W
Pan 2 R
R out
Balance D
Explanation
Adjusts the pitch of Pitch Shift 1
in semitone steps.
Adjusts the pitch of Pitch Shift
Pitch 1 in 2-cent steps.
Adjusts the delay time from the
direct sound until the Pitch Shift
1 sound is heard.
Adjusts the proportion of the
pitch shifted sound that is fed
back into the effect. Negative (-)
settings will invert the phase.
Stereo location of the Pitch Shift 1
sound
Volume of the Pitch Shift1 sound
Settings of the Pitch Shift 2
sound.
The parameters are the same as
for the Pitch Shift 1 sound.
Gain of the low range
Gain of the high range