Panel Descriptions; Front Panel - Roland JUNO-G Owner's Manual

Panel Descriptions

Front Panel

fig.Front
1
2
10
1
D BEAM
Switches D Beam function on/off. You can apply a variety of effects
to sounds simply by moving your hand (p. 69).
[SOLO SYNTH]
Play the JUNO-G as a monophonic synthesizer (p. 70).
[ACTIVE EXPRESS]
Play the JUNO-G as a active expression (p. 71).
[ASSIGNABLE]
You can assign a variety of parameters and functions to D Beam to
modify the sound in realtime (p. 71).
* Hold down [SHIFT] and press one of the corresponding buttons to
access the D BEAM setting screen.
2
VOLUME Knob
Adjusts the overall volume that is output from the rear panel
OUTPUT A (MIX) jacks and PHONES jack (p. 15).
[V-LINK]
Switches the V-LINK function on/off (p. 172).
Press this button to access the V-LINK setting screen.
3
MODE
[PATCH]
Enter Patch mode (p. 25).
[PERFORM]
View the Performance mode's Play screen (p. 58).
[LIVE SETTING]
View the LIVE SETTING screen (p. 83).
[USB]
Accesses the USB function select screen (p. 167).
[PART MIXER]
View the Performance mode's Mixer screen (p. 58).
[AUDITION]
Hold down this button to audition the currently selected sound (p. 28).
[TRANSPOSE]
By holding down [TRANSPOSE] and pressing [+] [-], you can raise
3 4
5 6
8
7
or lower the keyboard range in steps of a semitone (p. 29).
OCTAVE [UP] [DOWN]
Transposes the pitch of the keyboard in 1 octave units (p. 28).
4
EDIT
[PATCH]
Make patch-related settings (p. 30).
[EFFECTS]
Make effect-related settings (p. 125).
[MENU]
Opens the MENU. The contents of the menu will depend on the
current mode.
[SONG]
Press this button to edit the entire song or to edit MIDI tracks. Also,
this button is pressed to toggle between the Song Edit screen and the
Song List screen (p. 84, p. 87, p. 94).
[AUDIO]
This button accesses the Sample Edit screen. Also, this button is
pressed to toggle between the Sample Edit screen and the Sample
List screen (p. 117).
[WRITE]
Save edited settings into internal memory or a memory card (p. 32,
p. 51, p. 63, p. 76, p. 78, p. 124).
5
[ARPEGGIO]
Switches the ARPEGGIO on/off. The arpeggio setting screen will
appear when you turn this on (p. 73).
[CHORD MEMORY]
Switches the CHORD MEMORY on/off. The chord memory setting
screen will appear when you turn this on (p. 77).
6
Display
This displays information regarding the operation you are
performing.
9
11