Roland JUNO-G Owner's Manual page 98

Editing a Song (MIDI Track)
Copying Phrases (Copy)
This function copies a specified area of sequencer data. It is
convenient for repeating the same phrase several times.
For details on the settings, refer to Basic Operation for Track
Editing (p. 97).
Parameter Value
Src Ch/Part ALL, Ch 1–16
ALL: Copies all the sequencer data.
Ch 1–16: Copies only the sequencer data of a specific
MIDI channel.
* You can't specify this if Status is set to "System Exclusive."
Src Measure 0001–
For 1–ALL
Dst Ch/Part ALL, Ch 1–16
ALL: Copy performance data to all MIDI channels.
Ch 1–16: Copy performance data to the specified MIDI
channel.
* You can't specify this if Status is set to "System Exclusive."
Dst Measure 0001–END
Copy Mode MIX, REPLACE
MIX: Combines the data from the copy source with the
existing data in the copy destination.
REPLACE: Musical data in the copy destination will
be erased (i.e., overwritten) when the copy takes place.
Only the sequencer data of the MIDI channels specified
by the Channel parameter will be overwritten, and
data of other MIDI channels will remain.
Copy Times 1–999
Status ALL, Note, Poly Aftertouch,
Control Change, Program
Change, Channel Aftertouch,
Pitch Bend, System Exclusive
When "Status" is "Note" or "Poly Aftertouch"
Range Min 0 (C -)–127 (G9)
Range Max
When "Status" is "Control Change"
Range Min 0–127
Range Max
When "Status" is "Program Change"
Range Min 1–128
Range Max
* If you selected "ALL" for "Src Ch/Part" and "Dst Ch/Part," the tempo
track, beat track, and audio tracks will also be copied at the same time.
98
Explanation
MIDI channel of the perfor-
mance data to be copied
Range of copy-source mea-
sures
If you set "For" to "ALL,"
all measures will be speci-
fied.
MIDI channel of the copy-
destination performance
data
Copy-destination measure
* If you want the copy destina-
tion to be right after the last
measure of a song, set this
parameter to "END."
Specifies whether you want
to preserve the existing data
in the copy destination when
copying.
Number of times that the
data will be copied to the
copy destination
Type of data to be copied
Range of note numbers to be
copied
You can also specify the
key range by pressing
keys on the keyboard.
Range of controller numbers
to be copied
Range of program numbers
to be copied
Erasing Unwanted Performance
Data (Erase)
This function erases all the sequencer data inside the specified area. As
the erased data is replaced by rests, the original measures will remain.
For details on the settings, refer to Basic Operation for Track
Editing (p. 97).
Parameter Value
Ch/Part ALL, Ch 1–16
ALL: Erases all sequencer data.
Ch 1–16: Erases sequencer data of one specific MIDI
channel only.
* You can't specify this if Status is set to "System Exclusive."
Measure 0001–
For 1–ALL
Status ALL, Note, Poly Aftertouch,
Control Change, Program
Change, Channel Aftertouch,
Pitch Bend, System Exclusive
When "Status" is "Note" or "Poly Aftertouch"
Range Min 0 (C -)–127 (G9)
Range Max
When "Status" is "Control Change"
Range Min 0–127
Range Max
When "Status" is "Program Change"
Range Min 1–128
Range Max
* If you selected "ALL" for "Ch/Part," the tempo track and beat track
will also be erased at the same time.
Deleting Unwanted Measures
(Delete)
This function deletes a specified area of sequencer data, and moves
the subsequent data to fill the gap. As a result, the measure length
will be shortened by the number of deleted measures.
For details on the settings, refer to Basic Operation for Track
Editing (p. 97).
Parameter Value Explanation
Measure 0001– Range of measures to be deleted
If you set "For" to "ALL," all measures will be
For 1–
specified.
ALL
* The tempo track, beat track, and audio tracks will also be deleted at the
same time.
Explanation
MIDI channel of the data to
be erased
Range of measures to be
erased
If you set "For" to "ALL,"
all measures will be speci-
fied.
Type of data to be erased
Range of note numbers to be
erased
You can also specify the
key range by pressing
keys on the keyboard.
Range of controller numbers
to be erased
Range of program numbers
to be erased