Active Expression - Roland JUNO-G Owner's Manual

ACTIVE EXPRESSION

You can use the D Beam to apply the ideal type of expression for
each sound.
* The way in which expression is applied will differ for each sound. For
some sounds, the effect may be difficult to notice.
1.
Hold down [SHIFT] and press D BEAM [ACTIVE EXPRESS].
A screen like the following appears.
Parameter Value
Range Min 0–127
Range Max 0–127
ASSIGNABLE
You can assign various functions to the D Beam controller and apply
a wide range of effects to the sound in real time.
1.
Hold down [SHIFT] and press D BEAM [ASSIGNABLE].
A screen like the following appears.
2.
Press [ ] [ ] to select the parameter.
3.
Use the VALUE dial or [INC] [DEC] to make the setting.
Parameter Value
Type CC01–31, 33–95,
BEND UP,
BEND DOWN,
START/STOP,
TAP TEMPO,
ARP GRID,
ARP DURATION,
ARP MOTIF,
ARP OCTAVE UP,
ARP OCTAVE DOWN,
ARP STEP,
AFTERTOUCH
Range Min 0–127
Range Max 0–127
Explanation
Lower limit of the range of the D Beam controller
Upper limit of the range of the D Beam controller
By setting Range Max below Range Min you can invert the range of change.
Explanation
Function controlled by the D Beam controller
CC01–31, 33–95: Controller numbers 1–31, 33–95
BEND UP: Controls the pitch as specified by the "Pitch Bend Range Up" setting (p. 37).
BEND DOWN: Controls the pitch as specified by the "Pitch Bend Range Down" setting (p. 37).
START/STOP: Starts/Stops the song recorder.
TAP TEMPO: Tap tempo (a tempo specified by the interval at which you move your hand over the D Beam con-
troller).
ARP GRID: Arpeggio Grid
ARP DURATION: Duration of each arpeggiated note
ARP MOTIF: Arpeggio Motif
ARP OCTAVE UP: The range in which the arpeggio is sounded will rise in steps of an octave (maximum 3 oc-
taves).
ARP OCTAVE DOWN: The range in which the arpeggio is sounded will lower in steps of an octave (maximum 3
octaves).
ARP STEP: Controls the playback position of the arpeggio pattern.
AFTERTOUCH: Aftertouch
Lower limit of the range of the D Beam controller
Upper limit of the range of the D Beam controller
By setting Range Max below Range Min you can invert the range of change.
Modifying the Sound in Real Time
2.
Press [ ] [ ] to select the parameter.
3.
Use the VALUE dial or [INC] [DEC] to make the setting.
Press [F3 (DB ASGN)] to access the D Beam assignment screen,
or [F5 (DB SYN)] to access the D Beam solo synth screen.
4.
Press [EXIT] to return to the previous screen.
Setting for the Active Expression are saved for system settings.
Press [F4 (DB EXP)] to access the D Beam active expression
screen, or [F5 (DB SYN)] to access the D Beam solo synth screen.
4.
Press [EXIT] to return to the previous screen.
The settings for the ASSIGNABLE are saved independently for
each performance as part of the performance settings. This lets
you create performances that make effective use of controller
settings.
If Patch mode is selected, this is saved as part of the system
settings. If you want to save the settings, press [F6 (WRITE)].
71