Cleaning The Paper; Cleaning / Replacing The Air Filters - Kodak RP 30 Operator's Manual

Operator's Guide

Cleaning the Paper

Cleaning / Replacing the Air Filters

NOTE: The filter with holder is mounted on the fan that is next to the densitometer.
1. Remove the front cover of the paper outlet (1): Loosen the screw (2).
2. Remove the holder (1) from the fan housing.
3. Wash the filter mat if it is not very dirty.
4. Replace very dirty air filters.
5. Put the filter in the holder and insert the holder again.
8-32
Access after opening the flap on the paper outlet.
2
1
KODAK PROFESSIONAL RP 30 Laser Printer