Table of Contents
Advertisement
Features and Accessories
4
Input Leads. The input leads of the differential
probe connect to the crocodile clips and plunger
probes that come with the probe. The connectors
are double insulated for safety.
NOTE.
Use only the accessories provided with
the P5200 probe.
Plunger Probes. The plunger probes have long
probe sleeves with retracting hooks. These
probes connect safely to recessed test points that
are otherwise difficult to reach. The connectors
are double insulated for safety.
Crocodile Clips. The large insulated clips
connect easily to large bolts or bus bars. The
connectors are double insulated for safety.
Output Lead. The BNC output connection to
the oscilloscope is calibrated to drive a high
impedance (1 MΩ) load.
Adapter Jack. The power supply jack on the
probe output connects to the 9 VDC plug of the
AC adapter.
AC Adapter. The adapter converts AC line
voltage to 9 VDC for the probe power supply.
NOTE.
The AC adapter that accompanies the
P5200 probe is the only adapter specified for this
probe. Using any other adapter voids the product
warranty and may also produce electromagnetic
interference. Adapters for the line voltages of
other countries are also available. Refer to the
Replaceable Parts section. (See page 29.)
P5200 Instruction Manual
Advertisement
Table of Contents
