Table of Contents
Advertisement
Programming the cash register
The 9th line of the top text logo is a unique organization number. If this number is not set, the cash register will
not communicate with the Clean Cash security device. The format of this number is 6 - 4.
GRAPHIC LOGO
Programming of the graphic logo can be done by using the communication software available at www.elcom.eu
or with help of the Import function from SD card.
Parameters of the graphic logo :
•
format bmp
•
bit depth 1bit (without grayscale)
•
maximum size of 360 x 240 pixels (at lower pixel rate of the graphic logo, the logo is not stretched or
completed to maximum size)
Print of the graphic logo can be set by pressing the
pressed. If the print of the graphic logo is set to YES and the logo was not programmed, graphic logo will
be not printed on the receipt.
PROGRAMMING OPERATORS
Note:
Before start programming, read the chapter "Basic procedure at programming in P mode", which is at start
of the chapter "Programming ECR".
P-mode
Kassör
Set of the operator´s password allows operator to login to his account and this way enter different functions
and modes of the cah register. After a cashier´s login, the name set for his account will be printed on the
receipt and each operation made in time of his login will be recorded separately.
Table 3.8 – parameters for programming cashier accounts
Oper. name
Oper. password
10 characters
4 characters
Note:
If any change was made for actual logged in account, to apply the changes, log out and login has to be
done. Access to P mode cannot be denied for the first operator.
DEPARTMENTS
Note:
Prior to programming read as soon as possible the section „General procedure when programming in
P-mode", which is found at the start of the chapter „Programming the cash register".
P-mode
VGR
The Euro-50T Mini cash register allows you to program up to 20 different departments (To see what consti-
tutes a department and for an example, look in the introduction of this manual in the chapter „Basic Defini-
tions"). A department can be programmed with a name up to 18 characters in length.
28
Oper. X-mode
Oper. Z-mode
Yes
Yes
No
No
keys, after which the
Oper. P-mode
Yes
No
TOTAL key has to be
Oper. T-mode
Yes
No
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-50T Mini and is the answer not in the manual?
Questions and answers