Unpacking The Media Converter - Allied Telesis AT-DMC1000/SC Installation Manual

Chapter 2: Installation

Unpacking the Media Converter

36
To unpack the media converter, perform the following procedure:
1. Remove all of the components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the media converter on a level, secure surface.
3. In addition to the media converter, verify that the shipping container
includes the following items as follows:
Figure 15 on page 37 shows shipping container items for the

AT-DMC1000/SC and AT-DMC100/SC.
Figure 16 on page 37 shows shipping container items for the

AT-DMC1000/ST and AT-DMC100/ST.
Figure 17 on page 38 shows shipping container items for the

AT-DMC1000/LC and AT-DMC100/LC.
Figure 18 on page 39 shows the items in each package of the five-

pack shipping container for the optional, separately purchased
wall-mount kit.