Figure 26: Securing The Fiber Optic Cable Tie - Allied Telesis AT-DMC1000/SC Installation Manual

6. Secure the fiber optic cable to the media converter using the other
cable tie as described below and shown in Figure 26:
a. Insert the cable tie through the other integral notch on the mounting
bracket.
b. Route the cables next to the cable tie.
c. Loop the cable tie around the cables.
d. Fasten the cable tie.
Figure 26. Securing the Fiber Optic Cable Tie
7. Connect the twisted-pair cable to the twisted-pair port.
8. Power on the end nodes.
The media converter is now ready for use.
AT-DMC1000/100 Series Desktop Mini Media Converter Installation Guide
49