Introduction - Allied Telesis AT-DMC1000/SC Installation Manual

Chapter 1: Overview

Introduction

16
The AT-DMC1000/100 Series Desktop Mini Media Converters include the
following models:
AT-DMC1000/SC

AT-DMC1000/ST

AT-DMC1000/LC

AT-DMC100/SC

AT-DMC100/ST

AT-DMC100/LC

The AT-DMC1000/100 Series Desktop Mini Media Converters are
designed to extend the distance of your network by interconnecting LAN
devices that are physically separated by large distances.
These media converters:
Provide a smaller-sized space-saving alternative that allows

enterprises to connect 1000Mbps copper networks to 1000Mbps
fiber networks (AT-DMC1000/SC, AT-DMC1000/ST, and
AT-DMC1000/LC) or connect 100Mbps copper networks to
100Mbps fiber networks (AT-DMC100/SC, AT-DMC100/ST, and
AT-DMC100/LC): This offers a cost-effective method for
integrating fiber-optic cabling into a 100/1000 UTP environment.
Operate at 1000Mbps full duplex (AT-DMC1000/SC,

AT-DMC1000/ST, and AT-DMC1000/LC) or 100 Mbps full duplex
(AT-DMC100/SC, AT-DMC100/ST, and AT-DMC100/LC).
Can be installed on a desktop or can optionally be wall mounted:

easy to install and does not require any software configuration or
management.
Note
Wall-mounting equipment is ordered separately as a five-pack
package: five mounting brackets for five media converters.
In addition:
Optional Smart MissingLink™ (SML) may be enabled or disabled

using a DIP switch.
Powered via a Micro-B USB 5VDC connector. Can be powered

from a PC USB port or with the optional AC/DC power adapter.