Table of Contents
Advertisement
Chapter 2: Installation
Unpacking the Shipping Box
Guidelines
Unpacking the
Media Converter
40
When unpacking the media converter shipping package or
AT-DMCWLMT-005 wall-mount bracket kit, verify that the package
includes the contents shown in this section.
Here are guidelines for unpacking the shipping box:
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
The AT-DMCWLMT-005 wall-mount bracket kit includes 5 sets of
wall-mount brackets.
You must purchase the AT-DMCWLMT-005 wall-mount bracket kit
separately.
To unpack the media converter, perform the following procedure:
1. Remove all of the components from the shipping package.
2. Place the media converter on a level, secure surface.
3. In addition to the media converter, verify that the shipping container
includes the following items as follows:
Figure 24 shows shipping container items for the AT-DMC1000/SC
and AT-DMC100/SC.
Figure 24. AT-DMC1000/SC and AT-DMC100/SC Shipping Package
One USB cable
One power adapter
(depending on customer
order)
One fiber port
dust covers (pre-installed)
Contents
Advertisement
Table of Contents
