Chapter 3 Ami Bios Setup Utility; Starting - AXIOMTEK eBOX532-100-FL Series User Manual

The AMI UEFI BIOS provides users with a built-in setup program to modify basic system
configuration. All configured parameters are stored in a 16MB flash chip to save the setup
information whenever the power is turned off. This chapter provides users with detailed
description about how to set up basic system configuration through the AMI BIOS setup utility.
3.1

Starting

To enter the setup screens, follow the steps below:
1. Turn on the computer and press the <Del> key immediately.
2. After you press the <Del> key, the main BIOS setup menu displays. You can access the
other setup screens from the main BIOS setup menu, such as the Advanced and
Chipset menus.
NOTE If your computer can not boot after making and saving system changes
with Setup, you can restore BIOS optimal defaults by setting JP5 (see
section 2.4.3).
It is strongly recommended that you should avoid changing the chipset's defaults. Both AMI
and your system manufacturer have carefully set up these defaults that provide the best
performance and reliability.
AMI BIOS Setup Utility
eBOX532-100-FL Series User's Manual
CHAPTER 3
AMI BIOS Setup Utility
23