Sequencer Parameters (Front Panel); Additional Sequencer Parameters (Display Menus) - Dave Smith Instruments Sequential PROPHET X User Manual

6. To save the sequence, save the program by pressing the
button twice.

Sequencer Parameters (Front Panel)

Record: On, Off—
off on the polyphonic sequencer.
This switch starts and stops polyphonic sequencer playback.
Play: On, Off—

Additional Sequencer Parameters (Display Menus)

Additional sequencer parameters are found in the menus in the main
display. To see these, press the
Chord Note
1
CHORD NOTE
Tie
The Sequencer menu
Chord Note: 1...6—
a 6-note chord). The
within a chord for editing. Notes are listed from lowest to highest.
Selects a specific step within the sequence for editing.
Step: 1...64—
Note: C0...C10—
Velocity: 1...127, Rest—
knob fully clockwise sets the step to
Pressing Soft Key 1 adds a tie to the current step.
Tie—
Pressing Soft Key 2 adds a rest to the current step.
Rest—
Using Soft Knob 2 to navigate to a specific step then press-
Set Length—
ing Soft Key 3 resets the length of the sequence so that it will end after
the selected step.
Prophet X User's Guide
This switch turns sequencer recording/editing on and
record
Step Note
1 C5
STEP NOTE
Rest Set Length
The sequencer can record up to 6 notes per step (i.e.,
parameter lets you select a specific note
chord note
Sets the note value of the current step.
Sets the velocity of the current step. Turning the
button on the front panel.
Velocity
100
VELOCITY
.
rest
/
save load
Sequencer 69